How To Remove Restor A Finish

For over 50 years, Howard's Restor-A-Finish has been a standard in the antique industry. Because Restor-A-Cease preserves and restores beauty to the original wood stop, it helps preserve the antiques' authenticity and value, whereas stripping the terminate may literally strip the slice of its value. Restor-A-Finish penetrates faded lacquer, shellac, and varnish finishes to bring back the original color and luster. It restores the depth of grain in wood finishes, going much deeper than temporary "scratch cover" products. Restor-A-Stop penetrates and permanently restores most wood finishes without removing whatever of the existing cease - this is why information technology is very pop for antiques. Restor-A-Finish maintains the original "patina" of an antique finish, maintaining its graphic symbol and value as an antique. To protect the newly restored finish Feed-N-Wax is recommended as a follow-up to Restor-A-Finish.

"Restore Information technology – Don't Strip It!"

Permanently revive and restore the original color and luster in ane step, without removing whatsoever of the existing finish. Most wood finishes that seem to demand a consummate refinishing task tin be completely restored in a few minutes with this simple wipe-on, wipe-off procedure. White heat rings and watermarks, sun fade, oxidation, smoke impairment, and most other blemishes can be rapidly blended away. Earlier you go to the farthermost of stripping it, try restoring information technology!

Near any existing woods tone, from a light Birdseye Maple to a dark Jacobean, can be closely matched using 1 of the nine available finish colors. Restor-A-Finish should be used in a color that best matches your finish. If you are uncertain about which colour to use, so choose a color slightly lighter than your finish. It's recommended that you test Restor-A-Finish in an inconspicuous spot to make sure y'all similar what it does and how it matches the finish.

Restor-A-Finish is a unique finish-penetrating formula that contains a pocket-size corporeality of stain combined with just the right amount of solvent and restoring oils, giving it the unique ability to penetrate and permanently restore virtually existing finishes without removing whatsoever of the existing finish.

Choose the color of Restor-A-Terminate that all-time matches the end of your wood. Test on an camouflaged expanse. Utilize with a pocket-size pad of cloth, cover a small area at a time and immediately wipe dry. Do not pour directly on stop. To remove stubborn white rings, oxidation, or light scratches, apply Restor-A-Finish with a pad of super fine (0000) steel wool. Finishes vary in hardness, and then test pressure to be used with (0000) steel wool on an inconspicuous spot. Rub lightly in the direction of the wood grain until blemish is composite abroad. Cover a modest area at a time and wipe dry. To protect and maintain the newly restored finish, follow upwardly with Howard Feed-N-Wax.

When using a soft cloth or steel wool, rub with calorie-free pressure but hard enough to blend away the damage. As you lot restore the end be sure to periodically check your progress. Always rub with the grain of the wood. Some dry faded finishes volition only require a quick wipe-on, wipe-off awarding and volition quickly absorb Restor-A-End. Other finishes will require a little more than piece of work. Yet other finishes may require leaving the Restor-A-Finish on longer so it tin penetrate into the terminate and restore color and depth of grain deep into the wood.  All finishes are dissimilar, and then testing first may exist required. Always wipe off excess Restor-A-Stop.

For all-time results, wait at least 30 minutes and then use a coat of Howard Feed-Due north-Wax to protect and maintain the newly restored stop. So re-apply Feed-N-Wax as needed, or when the finish starts to expect dry.

Treating carved woods: Restor-A-Stop has saved many hours of labor by speedily restoring color and depth of grain on carved wooden furniture, clocks and picture frames. Simply apply Restor-A-Stop with a small paintbrush or soft toothbrush and wipe dry.

** If a high gloss finish should appear dull due to the employ of steel wool, polish it out with Restor-A-Polish Polishing Chemical compound. Restore-A-Shine is perfect for the final stride in restoring loftier gloss finishes past buffing away fine scratches merely seen in the light.  These super fine lines in the finish from a distance creating the expect of "dullness" on loftier gloss finishes and can exist hands buffed abroad with Restor-A-Shine Polishing Compound.

Precautions

Commencement examination Restor-A-Finish on a pocket-sized camouflaged area to check results, penetration into the finish, correct color, and if to use (0000) super fine steel wool or a soft cloth. Apply Restor-A-Finish to a small expanse at a time and ever wipe dry. Be conscientious to protect fabric, carpets, or linoleum when applying Restor-A-Finish, equally it may go out a permanent stain. If spilling does occur, immediately scrub area with soap and h2o or a stain remover and wipe dry out.

Do non use polyurethane over Restor-A-Finish. Continue in heed that the purpose of Restor-A-Finish is to restore an existing finish. No need to put some other finish on acme, just Feed-N-Wax. Also, Restor-A-Cease may not exist able to penetrate harder "plastic" finishes, imitation simulated forest finishes, or some hard polyurethane finishes.  Not recommended for floors or outside surfaces. May not work well on "one footstep stain and poly" finishes. Await 30 days to dry if using polyurethane or other clear glaze finishes on acme of Restor-A-Terminate.

CAUTIONS: DANGER. CONTENTS MAY CATCH Burn down. FUMES MAY CATCH Burn. CONTENTS HARMFUL. MAY IRRITATE EYES. MAY IRRITATE Peel. Do not mix with other chemicals. Do not smoke. Do not swallow. Do non get in eyes, on skin or habiliment.

Keep out of attain of children. Keep away from flames, such equally a pilot lite, and any object that sparks, such equally an electric motor.

First Aid: If swallowed, Do Not INDUCE Vomiting, Call Physician immediately. If breathed in, move person into fresh air. Heart CONTACT: Immediately flush with water for at least 15 minutes. Skin CONTACT: Wash with soap and h2o. Contains Hydrogenated Mineral Oil, Isopropanol, Acetone. Shop in a cool place. Keep container airtight.

Utilize WITH ADEQUATE VENTILATION. To avoid breathing vapors, open windows and doors or use other means to ensure a cantankerous ventilation of fresh air through piece of work area. If y'all experience centre watering, headaches or dizziness, increase fresh air or wear respiratory protection (NIOSH/MSHA approved with organic vapor filter) or leave the expanse. Avert prolonged contact with skin. Close container after each utilise. Do not transfer contents to bottles or unlabeled containers. Earlier using this product in the workplace, read the Safety Data Canvass (SDS) available online. This production is intended for occasional use only. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage.

WARNING: This product tin expose you lot to chemicals including Ethylbenzene, which are known to the State of California to cause cancer, and Toluene, which is known to the State of California to crusade nascency defects or other reproductive harm. For more information go to world wide web.P65Warnings.ca.gov.

This product is made from the finest raw materials available and manufactured to proven conception under strict quality control for its intended use on natural forest finishes. Still, results obtained with the use of this production nether a diverseness of conditions may depend on circumstances across our control. Howard Products, Inc. and the  seller therefore disclaim  any responsibility for expense or consequential damage of any kind. The just warranty extended, expressed or unsaid, is for lacking workmanship or materials.

How To Remove Restor A Finish,

Source: https://www.howardproducts.com/product/restor-a-finish/

Posted by: vannotedidich.blogspot.com

Share this post